Toilet Repair in St. Louis, Done Right the First Time

Most toilet problems come down to a few parts: the flapper, the fill valve, the wax ring or a clog in the trap. A licensed plumber can usually fix them in one visit. If the toilet is cracked or decades old, replacing it often costs less over time. Call +1 314 648 0564 to reach a local plumber, day or night.

Don't let a running toilet slide. According to the EPA's WaterSense program, a leaking toilet can waste around 200 gallons of water a day, and a slow leak at the base can rot the subfloor before you see it. Through Koo Plumbing, you're connected with licensed plumbers in St. Louis, MO who work on everything from 1920s bathrooms in the Central West End to newer builds in Chesterfield.

Quick Checks Before You Call

  1. Toilet about to overflow? Lift the tank lid and push the flapper down, then turn the shut-off valve behind the toilet clockwise. That stops the water while you deal with the clog.
  2. Running all the time? Put a few drops of food coloring in the tank and wait 10 to 15 minutes without flushing. Color in the bowl means the flapper is leaking.
  3. Clogged? Use a flange plunger (the kind with a rubber sleeve), not a flat sink plunger, and skip chemical drain cleaners; they rarely clear a toilet and they're hard on old pipes.
  4. Backing up when the washer drains or a shower runs? That's not a toilet problem. The main sewer line is clogged; see drain cleaning and rooter service. If it happens during heavy rain, our MSD backwater valve guide explains who to call.

Toilet Repair & Replacement Services

Contractors in our network handle every common toilet repair, plus full replacements:

  • Running Toilet & Ghost Flushing Repairs: Rebuilding internal tank components including faulty rubber flappers, fluidmaster fill valves, overflow tubes, and float assemblies to stop constant water trickling.
  • Toilet Base Leak & Wax Ring Replacement: Removing the toilet to replace decayed wax gaskets, installing reinforced urethane seals, repairing rusted cast iron closet flanges, and tightening closet bolts to eliminate base leaks and sewer smells.
  • Heavy-Duty Clog Removal & Mechanical Snaking: Utilizing commercial toilet augers with protective vinyl sleeves that safely clear deep obstructions beyond the trapway without scratching porcelain enamel.
  • Weak & Incomplete Flush Restoration: Descaling hard water mineral build-up inside the bowl's siphon jet and rim holes to restore a powerful, vortex flush.
  • Emergency Shut-Off Valve (Angle Stop) Upgrades: Replacing corroded, seized multi-turn shutoff valves beneath the tank with modern, 1/4-turn solid brass valves and braided stainless steel supply lines.
  • Cracked Tank & Bowl Porcelain Replacement: Diagnosing hairline fractures that threaten sudden catastrophic tank blowouts and replacing damaged fixtures.
  • Complete Toilet Upgrades & Installations: Sourcing and installing high-efficiency WaterSense certified 1.28 GPF units, dual-flush systems, comfort-height (ADA compliant) seating, and sleek skirted toilets from Kohler, TOTO, American Standard, and Gerber.
Is Your Toilet Leaking Beneath the Floor?

Water pooling around the base of your toilet bowl is not just an inconvenience—it is contaminated wastewater carrying bacteria and sewer gas. If the toilet rocks when you sit down, the wooden subfloor or closet flange beneath may already be softening from long-term rot. Prompt resealing protects your flooring joists from structural compromise.

Connect With a Plumber: +1 314 648 0564

Common Toilet Problems & Professional Solutions

Symptom Root Cause Recommended Repair
Constant Hissing / Tank Refills Worn flapper, deteriorated flush valve seal, or improperly set float Flapper replacement and fill valve calibration
Puddle at Base After Flush Failed wax gasket, broken closet flange ring, or loose floor bolts Toilet pull, closet flange restoration, and heavy-duty wax reseal
Bowl Empties Slowly / Gurgles Obstruction in trapway or partial blockage in secondary sewer vent stack Professional mechanical auger snaking or vent line clearance
Toilet Rocks or Tilts Uneven tile floor, rotted wooden subfloor, or snapped T-bolts Flange shimming, subfloor reinforcement, and new brass bolts
Weak Flush Requiring Double-Flushing Hard water calcium crust blocking rim wash holes and siphon jet Acid descaling of water passages or modern 1.28 GPF replacement

Historic St. Louis Homes & Vintage Plumbing Nuances

Many properties throughout historic St. Louis neighborhoods—including Soulard, Compton Heights, Benton Park, and Tower Grove—were built in the late 19th and early 20th centuries. These homes feature unique architectural details that require specialized plumbing know-how:

  • Non-Standard Rough-In Dimensions: Modern residential toilets typically require a standard 12-inch rough-in distance (measured from the drywall to the center of the drain bolts). Historic St. Louis bathrooms frequently feature tight 10-inch or extended 14-inch rough-ins. Installing a standard toilet without taking precise measurements will either fail to fit against the wall or leave an unsightly 2-inch gap.
  • Aging Cast Iron & Lead Bends: Older homes often have cast iron waste stacks, sometimes with lead bends under the toilet. Forcing a modern plastic flange onto old lead or cast iron can crack the drain and cause a hidden leak into the ceiling below, so the plumber needs the right transition fittings for the job.
  • Hard Water Scale in Aging Fixtures: St. Louis municipal water carries moderate mineral hardness that encrusts inside narrow porcelain rim jets over decades. If your toilet is older than 25 years, upgrading to modern glazed trapways ensures hassle-free flushing.

If your bathroom updates also include dripping vanity faucets, clogged basin drains, or leaking shower mixing valves, discover our comprehensive Faucet, Sink & Shower Plumbing guide. For concealed supply pipe issues or freezing hazards in exterior bathroom walls, see our emergency Burst Pipe Repair & Home Repiping services.

Frequently Asked Questions About Toilet Repair

A toilet that runs constantly or cycles on and off without being used (ghost flushing) is almost always caused by a deteriorated flapper seal or an improperly adjusted fill valve. When water slowly leaks from the tank into the bowl, the float drops, triggering the fill valve to refill the tank. Replacing the flapper and valve assembly usually resolves the issue.

Water pooling around the base of the toilet is most often caused by a failed wax ring gasket or loose closet flange bolts. Every time you flush, wastewater seeps onto the bathroom subfloor. This requires removing the toilet, inspecting the closet flange, and installing a new reinforced wax or rubber gasket to prevent subfloor rot.

If your toilet only requires a new flapper, fill valve, or handle, repair is very cost-effective. However, if your toilet was made before 1994 (when the 1.6-gallon federal limit took effect, older models often use 3.5 gallons or more per flush), has hairline porcelain cracks, or suffers from chronic clogging due to mineral-encrusted siphon jets, upgrading to a modern 1.28 GPF WaterSense or dual-flush toilet will save money on water bills and provide superior flushing power.

Yes. While modern construction utilizes a standard 12-inch rough-in (distance from the finished wall to the center of the drain flange), many historic St. Louis homes in Soulard, Lafayette Square, and Central West End feature 10-inch or 14-inch rough-in dimensions. A licensed technician measures your rough-in before ordering to ensure seamless fitment.

ST. LOUIS & SURROUNDING AREAS

Local Service Area

Call plumber